RESET klavijatura i vasih uredjaja!!!! - YU-MIDI Muzički Portal

milanceshow · 03.02.2009, 23:39

ROLAND XP10 Press UTILITY. Use the VALUE + or - to select INITIALIZE, then press ENTER. Use the VALUE + or - to select FACTORY PRESET, then press ENTER.
ROLAND XP30 Press UTILITY/CARD. Press the CURSOR DOWN then press #4 (BASS). Press ENTER (if protect message appears, use the DIAL to turn the Memory Protect OFF, then press ENTER twice).
ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ).
ROLAND XP50 Press DISK/UTILITY. Select SOUND, then select PRESET and press ENTER. Use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER twice.
ROLAND XP60 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XP80 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XV2020 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND XV3080 Press UTILITY and the CURSOR DOWN to UTIL page 2. CUROSR (<) or (>) to make the FACTORY RESET flash. Press ENTER three times.
ROLAND XV5050 Press UTILITY and then CUROR (<). Turn the VALUE DIAL to select FACTORY RESET and press ENTER twice.
ROLAND XV5080 Press SYSTEM/UTILITY so that the light starts blinking. Press F6 (MENU) and then F5 (FACTORY). Then press F6 (EXECUTE).
ROLAND XV88 Press UTILITY and then CURSOR DOWN to UTILITY page 2. Press 4(BASS) and then ENTER twice.

03.02.2009, 23:39	#10
milanceshow Nishki Registrovan/a dana: 02.12.2007 Mjesto: Srbija,Nis-Prokuplje Postovi: 1.332 Downloads: 538 Uploads: 16 Rekao HVALA: 9 Zahvalili mu 83 puta u 69 Postova Instrumenti: Roland E80 i FantomG Interesi: Heklanje....	ROLAND XP10 Press UTILITY. Use the VALUE + or - to select INITIALIZE, then press ENTER. Use the VALUE + or - to select FACTORY PRESET, then press ENTER. ROLAND XP30 Press UTILITY/CARD. Press the CURSOR DOWN then press #4 (BASS). Press ENTER (if protect message appears, use the DIAL to turn the Memory Protect OFF, then press ENTER twice). ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ). ROLAND XP50 Press DISK/UTILITY. Select SOUND, then select PRESET and press ENTER. Use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER twice. ROLAND XP60 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE). ROLAND XP80 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE). ROLAND XV2020 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice. ROLAND XV3080 Press UTILITY and the CURSOR DOWN to UTIL page 2. CUROSR (<) or (>) to make the FACTORY RESET flash. Press ENTER three times. ROLAND XV5050 Press UTILITY and then CUROR (<). Turn the VALUE DIAL to select FACTORY RESET and press ENTER twice. ROLAND XV5080 Press SYSTEM/UTILITY so that the light starts blinking. Press F6 (MENU) and then F5 (FACTORY). Then press F6 (EXECUTE). ROLAND XV88 Press UTILITY and then CURSOR DOWN to UTILITY page 2. Press 4(BASS) and then ENTER twice.