Korisničko Ime
Lozinka
Registracija


Nazad   YU-MIDI Muzički Portal - Muzičarski forum > Klavijature > Ostalo > Servis klavijatura - uradi sam

Servis klavijatura - uradi sam Savjeti oko popravka, čišćenja, izmena dirki, mikroprekidača, napajanja i sl.

Odgovor
 
Alati tema Display Modes
Star 03.02.2009, 22:36   #1
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND G1000 Please call 01792 515003
ROLAND G600 Power on while holding WRITE
ROLAND G-800 HOLD WRITE, THEN POWER ON.
ROLAND G800 Power on while holding WRITE
ROLAND GC-8 no rom reset.
ROLAND GC8 No ROM Reset.
ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALUE +.
ROLAND GI10 Power on whilst holding down the PARAMETER + and - buttons, then press the VALUE + button.
ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA TRANSFER THEN POWER ON.
ROLAND GM70 Poly Mode: Power on whilst holding down PLAY, GENERAL EDIT and IND EDIT. Mono Mode: Power on whilst holding down TUNE, CONTROL ASSIGN, and DATA TRANSFER.
ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE.
ROLAND GP100 Power on whilst pressing in the PARAMETER KNOB, then press WRITE.
ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS WRITE 3 TIMES.
ROLAND GP16 Power on whilst holding down the #6, #7 and #8 buttons. Use the FUNCTION (<) and (>) buttons to select "2.All Factory Preset", then press WRITE three times.
ROLAND GP-8 no rom reset.
ROLAND GP8 No ROM Reset.
ROLAND GR (ALL OTHER) no rom reset.
ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN PRESS EDIT/PLAY.
ROLAND GR09 Power on whilst holding down the #2 pedal, then press the VALUE + button, followed by the EDIT/PLAY button.
ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES.
ROLAND GR1 Power on whilst holding down the WRITE/COPY button, then press YES
ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY.
ROLAND GR30 Power on whilst holding down the #2 pedal, then press the PATCH + button to select INI. Press the EDIT/PLAY button and then the PATCH + and PATCH - buttons simultaneously.
ROLAND GR33 Press SYSTEM and then PARAMETER. Use the VALUE DIAL to select ALL in the display. Press WRITE twice.
ROLAND GR-50 no rom reset. {*}
ROLAND GS-6 no rom reset.
ROLAND GS6 No ROM Reset.
ROLAND GT3 Power on whilst holding down MOD and SFX. Press WRITE.
ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE.
ROLAND GT5 Power on whilst holding down MOD and FEEDBACKER/SLOWGEAR. Press WRITE.
ROLAND GT6 Power on whilst holding down PREAMP SPEAKER ON/OFF and TYPE VARIATION. Press ENTER.
ROLAND GT6B Power on whilst holding down COMPRESSOR/LIMITER ON/OFF and TYPE VARIATION. Press ENTER
ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY.
ROLAND GX700 Press TUNER/UTILITY. Use PARAMETER (<) and (>) to select FACT INIT. Cursor LEFT and dial SYSTEM then cursor RIGHT and dial P#100. Press WRITE and then TUNER/UTILITY.
ROLAND HP (ALL OTHER) resets at power on.
ROLAND HP-100 no rom reset.
ROLAND HP-300 no rom reset.
ROLAND HP-400 no rom reset.
ROLAND HPD15 Press SYSTEM, then PARAMETER (>) RIGHT to "Factory Reset". Use the PATCH/VALUE DIAL to select ALL and press WRITE
ROLAND HS SERIES no rom reset.
ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY PRESET, PRESS YES.
ROLAND JD800 Press DATA TRANSFER. Use page UP and DOWN to select FACTORY PRESET, then press ENTER.
ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5.
ROLAND JD990 Whilst holding EXIT, press UTILITY. Press F6 (EXECUTE) and the F5 (YES).
ROLAND JP-6 no rom reset.
ROLAND JP6 No ROM Reset.
ROLAND JP-8 no rom reset.
ROLAND JP8 No ROM Reset.
ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESET.
ROLAND JP8000 Whilst holding down the SHIFT button, press INIT/UTIL. Press INIT/UTIL again util you get INITALIZE WRITE in the screen. Use the DOWN and UP buttons to select FACTORY PRESET, then press the WRITE button.
ROLAND JP8080 Press EDIT and then Bank 7 (also labelled INIT/UTIL) several times to access "FACTORY RESET " in the display. Press DEC or INC to select ALL in the screen and then press REC followed by WRITE.
ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON.
ROLAND JS30 Power on whilst holding down the RECORD button, located in the sequencer section.
ROLAND JS5 Press UTILITY then CURSOR (>) to "Factory Reset?". Press ENTER twice.
ROLAND JUN0-106 no rom reset.
ROLAND JUN0-60 no rom reset.
ROLAND JUNO 1 No ROM Reset.
ROLAND JUNO 106 No ROM Reset.
ROLAND JUNO 2 No ROM Reset.
ROLAND JUNO 6 No ROM Reset.
ROLAND JUNO 60 No ROM Reset.
ROLAND JUNO-1 no rom reset.
ROLAND JUNO-2 no rom reset.
ROLAND JUNO-6 no rom reset.
ROLAND JUPITER 6 No ROM Reset.
ROLAND JUPITER 8 No ROM Reset.
ROLAND JUPITER-6 no rom reset.
ROLAND JUPITER-8 no rom reset.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 22:36   #2
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV1000 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV1010 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY.
ROLAND JV1080 Press UTILITY, cursor down once, then cursor right three times to select FACTORY PRESET. Press ENTER twice, then press UTILITY.
ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND PRESS F6 TWICE.
ROLAND JV2080 Press UTILITY. Press F6 twice to select MENU 3. Press F1 and then F6 (turn the "memory protect" to OFF if necessary using the VALUE DIAL). Press F6 twice.
ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP.
ROLAND JV30 Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP.
ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV35 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV50 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV80 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY PRESET. PRESS ENTER TWICE.
ROLAND JV880 Press UTILITY, then use the DATA DIAL to select FACTORY PRESET. Press ENTER twice.
ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV90 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 THEN F4.
ROLAND JW50 Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET), then F4 (YES).
ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON.
ROLAND JX1 Power on whilst holding down WRITE and FLUTE.
ROLAND JX-10 no rom reset.
ROLAND JX10 No ROM Reset.
ROLAND JX-3P no rom reset.
ROLAND JX3P No ROM Reset.
ROLAND JX-8P no rom reset.
ROLAND JX8P No ROM Reset.
ROLAND KF90 Press FUNCTION, touch SYSTEM, touch FACTORY RESET, touch EXECUTE, touch OK
ROLAND KR-100 resets at power on.
ROLAND KR100 The unit resets each time you turn it on
ROLAND KR1070 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then tocuh EXECUTE, then touch OK
ROLAND KR177 Press UTILITY, use the PAGE buttons to select FACTORY PRESET and press EXECUTE then OK
ROLAND KR277 Press FUNCTION na duse TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR-3000 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR3000 While holding FROM and TO, press WRITE
ROLAND KR-33 resets at power on.
ROLAND KR33 The unit resets each time you turn it on
ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR350 While holding LOAD and SAVE, press WRITE
ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR3500 While holding LOAD and SAVE, press WRITE
ROLAND KR-370 resets at power on.
ROLAND KR370 The unit resets each time you turn it on
ROLAND KR375 Press FUNCTION and use TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR377 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR4500 While holding LOAD and SAVE, press WRITE
ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR4700 While holding EDIT, press LOAD and SAVE
ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR500 While holding FROM and TO, press WRITE
ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR5000 While holding EDIT, press LOAD and SAVE
ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS).
ROLAND KR55 Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds
ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR5500 While holding LOAD and SAVE, press WRITE
ROLAND KR570 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR575 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR577 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK
ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR650 While holding LOAD and SAVE, press WRITE
ROLAND KR75 Press UTILITY, use the buttons under PAGE to select FACTORY PRESET, press EXECUTE, then OK.
ROLAND KR770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR977 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK
milanceshow je offline   Reply With Quote
Star 03.02.2009, 22:37   #3
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND LVC1 Power on while holding ENTER
ROLAND LVC-1N HOLD ENTER BUTTON THEN POWER ON.
ROLAND M-760 HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SELECT ALL + PRESS WRITE. ON COMPLETION PRESS EDIT TO RETURN TO PLAY.
ROLAND MBD1 HOLD F3 AND THEN POWER ON.
ROLAND MBD1 Power on whilst holding down the F3 button.
ROLAND MC SERIES; EXC 303 no rom reset.
ROLAND MC SERIES; EXC 303 no rom reset.
ROLAND MC-303 HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER.
ROLAND MC303 Power on whilst holding down the SHIFT button, then press ENTER.
ROLAND MC307 Press SYSTEM, then F2 (UTIL). CURSOR DOWN to FACTORY RESET and press F1 (FACT). Press F4 (EXEC).
ROLAND MC50 No ROM Reset.
ROLAND MC505 Power on whilst holding down the SHIFT button, then press ENTER.
ROLAND MC50MKII No ROM Reset.
ROLAND MC80 No ROM Reset.
ROLAND MC80EX No ROM Reset.
ROLAND M-DC1 HOLD F3 AND THEN POWER ON.
ROLAND M-DC1 HOLD F3 AND THEN POWER ON.
ROLAND MDC1 Power on whilst holding down the F3 button.
ROLAND ME-10 HOLD BANK DOWN PEDAL, THEN PRESS WRITE.
ROLAND ME10 Power on whilst holding down the BANK DOWN pedal, then press WRITE.
ROLAND ME30 Power on whilst holding down the PARAMETER (>) RIGHT and VALUE - then press WRITE/COPY.
ROLAND ME33 Power on whilst holding down EZ TONE and AMP/EFFECT(>) then press WRITE.
ROLAND ME-5 HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMEDIATELY.
ROLAND ME5 Power on whilst holding down pedals #1 and #2, then press WRITE immediately.
ROLAND ME-6 HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME6 Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND ME-6B HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME6B Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND ME-8 HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY.
ROLAND ME8 Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE/COPY.
ROLAND ME-8B HOLD PARAMETER LEFT + DOWN BUTTONS, THEN PRESS WRITE/COPY.
ROLAND ME8B Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE/COPY.
ROLAND ME-X HOLD PARAMETER LEFT + DOWN AND POWER ON, THEN PRESS WRITE.
ROLAND MEX Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND M-GS64 HOLD F3 AND THEN POWER ON.
ROLAND MGS64 Power on whilst holding down the F3 button.
ROLAND MK60 No ROM Reset.
ROLAND MK-80 HOLD WRITE, PRESS EDIT. HOLD LEFT AND RIGHT CURSOR BUTTONS AND PRESS UP.
ROLAND MK80 While holding WRITE, press EDIT. Then whilst holding down the LEFT (<) and RIGHT (>) CURSOR buttons, press the UP CURSOR.
ROLAND MKB SERIES no rom reset.
ROLAND MKS-50 POLY MODE: HOLD 4 AND 8 AND POWER ON. MONO MODE: HOLD 3 AND 7 THEN POWER ON.
ROLAND MKS-50 MONO MODE: HOLD NUMBER BUTTONS 3 AND 7 AND POWER ON.
ROLAND MKS50 Poly Mode: Power on whilst holding down the number 4 and 8 buttons. Mono Mode: Power on whilst holding down the number 3 and 7 buttons
ROLAND MMP2 Press SYSTEM until it lights orange. Use the PAGE (<)(>) buttons to select INITIALIZE and use the left VALUE CONTROL to select ALL, then press ENTER twice.
ROLAND M-OC1 HOLD F3 AND THEN POWER ON.
ROLAND MOC1 Power on whilst holding down the F3 button.
ROLAND MP SERIES no rom reset.
ROLAND MS-1 no rom reset.
ROLAND MS1 No ROM Reset.
ROLAND M-SE1 HOLD F3 AND THEN POWER ON.
ROLAND MSE1 Power on whilst holding down the F3 button.
ROLAND MSQ-100 no rom reset.
ROLAND MSQ100 No ROM Reset.
ROLAND MSQ-700 no rom reset.
ROLAND MSQ700 No ROM Reset.
ROLAND MT-100 HOLD STOP, PRESS DELETE. AFTER THE DISPLAY FLASHES "ALL CLEAR" PRESS EXECUTE.
ROLAND MT100 While holding STOP, press DELETE. After the display flashes ALL CLEAR, press EXECUTE
ROLAND MT-120 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT120 Power on while holding REPEAT, SONG and PLAY. Press FWD until the window reads T-13.
ROLAND MT-120S HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT-200 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. USE DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT200 Power on while holding REPEAT, SONG and PLAY. Use the DIAL until the window reads T-15.
ROLAND MT300 Press MENU, use the DIAL until FACTORY PRESET is displayed in the window. Press ENTER twice
ROLAND MT-32 HOLD MASTER VOLUME, PRESS RHYTHM PART, PRESS PART 1.
ROLAND MT32 While holding MASTER VOLUME, press RHYTHM PART. Press PART 1
ROLAND MT-80 resets at power on.
ROLAND MT80 The unit resets each time you turn on
ROLAND MV-30 no rom reset.
ROLAND MV30 No ROM Reset.
ROLAND M-VS1 HOLD F3 AND THEN POWER ON.
ROLAND MVS1 Power on whilst holding down the F3 button.
ROLAND OCTAPAD HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON AGAIN.
ROLAND OCTAPAD II HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND P-330 no rom reset.
ROLAND P-55 HOLD BOTH INSTRUMENT BUTTONS, POWER ON, THEN PRESS PARAM 1.
ROLAND PAD-8 HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON.
ROLAND PAD8 Power on whilst holding down the MIDI CH and NOTE NUMBER. Power the unit OFF and then back ON again.
ROLAND PAD-80 HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND PAD80 Power on whilst holding down both the VALUE buttons.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 22:38   #4
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON.
ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON.
ROLAND PIANO PLUS (ALL) no rom reset.
ROLAND PK5 Power on while holding OCT/PARAM
ROLAND PK7 No ROM reset
ROLAND PLANET-P no rom reset.
ROLAND PLANET-S no rom reset.
ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC.
ROLAND PRO-E HOLD WRITE, POWER ON.
ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R5 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS.
ROLAND R70 Power on whilst holding down the MIDI and ASSIGN buttons.
ROLAND R8 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R880 No ROM Reset.
ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R8M Power on whilst holding down ENTER and RIGHT (>) CURSOR, then press the ENTER button twice.
ROLAND R8MKII Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND RA30 The unit resets each time you turn it on
ROLAND RA-50 HOLD WRITE THEN POWER ON.
ROLAND RA50 Power on while holding WRITE
ROLAND RA800 Power on while holding WRITE
ROLAND RA-90 HOLD WRITE THEN POWER ON.
ROLAND RA90 Power on while holding WRITE
ROLAND RA-95 HOLD REC, POWER ON.
ROLAND RA95 Power on while holding REC
ROLAND RD100 No ROM Reset
ROLAND RD500 Power on whilst holding down the NUMBER 1 and 8 buttons, then press DEC/YES.
ROLAND RD600 Press EDIT, then the RIGHT PAGE button until "INITIALIZE ALL" is displayed. Press INC/YES twice. Press EDIT to return to the play mode.
ROLAND RD600 Press EDIT, use page button to display INT ALL, press YES twice and EDIT to return to play mode
ROLAND RD700 Press EDIT, then press TONE SWITCH 9. Press ENTER then CURSOR DOWN to FACTORY RESET ALL. Press ENTER and then the YES button.
ROLAND RS5 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RS9 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, THEN PRESS WRITE.
ROLAND RSP550 Power on whilst holding down PROGRAM, PAGE UP and PAGE DOWN. Then press WRITE.
ROLAND RSS10 Power on whilst holding down LOCK and OPTION.Press DEMO PROGRAM four times. Then press DEVICE ID.
ROLAND RSS8040 No ROM Reset.
ROLAND RV70 Power on whilst holding down WRITE and DOWN. Use the UP and DOWN buttons to select ALL. Press WRITE, then power the unit OFF and back On again.
ROLAND SB-55 POWER ON WHILE CLEAR.
ROLAND SBX1000 No ROM Reset.
ROLAND SC-155 POWER IN STANDBY MODE. HOLD BOTH INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL.
ROLAND SC155 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PRESS YES.
ROLAND SC33 Power on while holding REVERB and SPLIT, then press YES
ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC50 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55mkII Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC7 The unit resets each time you turn on
ROLAND SC88 While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SC88pro While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SD35 Power on while holding CLEAR, then press REC
ROLAND SDD320 No ROM Reset.
ROLAND SDE330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SDX330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SE50 Power on whilst holding down PARAM UP and VALUE UP. Press WRITE, wait for three seconds and the press WRITE again..
ROLAND SE70 Power on whilst holding in the NUMBER/VALUE knob, press PARAMETER (<) LEFT. Use the NUMBER/VALUE knob to select STANDARD mode or GUITAR mode. Press WRITE.
ROLAND SH101 No ROM Reset.
ROLAND SH2000 No ROM Reset.
ROLAND SH32 Power on whilst holding down (1/A), press VALUE UP/DOWN to display ALL in the screen. Press WRITE twice.
ROLAND SN700 No ROM Reset.
ROLAND SP202 Power on wihlst holding down the SOURCE pad.
ROLAND SP303 Power on whilst holding down CANCEL, REMAIN and DEL, then press REC.
ROLAND SP505 Press SONG, then SYSTEM. Press F1(UTILITY) then F3(INIT). Use the VALUE DIAL to select ALL and press F1 twice to execute the operation. Press PTN or SONG to return to the play screen.
ROLAND SP700 No ROM Reset.
ROLAND SP808 Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SP808EX Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SPD11 Power on whilst holding down ALL/ENTER and DOWN. Then press ALL/ENTER again.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 22:38   #5
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND SPD20 Power on whilst holding down the CURSOR DOWN and ALL/ENTER. Press the ALL/ENTER button again to complete the proceedure.
ROLAND SPD8 Power on whilst holding down EDIT, then press COPY. Use the VALUE UP and DOWN to select "F_A_L" in the screen. Press ALL/ENTER.
ROLAND SRC2 No ROM Reset.
ROLAND SRV1000 No ROM Reset
ROLAND SRV2000 Power on whilst holding down the WRITE and REVERB NON LINEAR buttons.
ROLAND SRV3030 Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV3030D Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SSC8004 No ROM Reset
ROLAND SX700 Press UTILITY. Use PARAMETER (<) LEFT and (>) RIGHT to select FACT INIT, then press WRITE.
ROLAND TB303 No ROM Reset
ROLAND TD10 Press SETUP, then press F4 three times.
ROLAND TD5 Power on whilst holding down EDIT and START/STOP, then press START/STOP again.
ROLAND TD6 Whilst holding SHIFT, press EDIT(SETUP) then CURSOR (>) to FACTORY RESET. Press ENTER then INC/DEC to select ALL, finish by pressing ENTER.
ROLAND TD7 Press SYSTEM. Use the CURSOR keys to select INI and press ENTER. CURSOR to HIHAT and use the DATA DIAL to select ALL. Press ENTER twice.
ROLAND TD8 Press SYSTEM then F3(MENU), use the CURSOR DOWN to select RESET and then press F3 again. Use the VALUE DIAL to select ALL and then press F3 twice.
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TP20 No ROM Reset
ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON.
ROLAND TR505 Power on whilst holding down MODE and PATTERN KEY GROUP A.
ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON.
ROLAND TR626 Power on whilst holding down MODE and TRACK #1.
ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR707 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR727 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR808 No ROM Reset
ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON.
ROLAND TR909 Power on whilst holding down TRACK #1 and Pattern #1.
ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON.
ROLAND U110 Power on whilst holding down PART and EDIT.
ROLAND U20 No ROM Reset
ROLAND U220 No ROM Reset
ROLAND VA5 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VA7 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VBASS Whilst holding down the PAGE < and PAGE > turn on the power. Press the WRITE button twice.
ROLAND VF1 Press UTILITY, then rotate the VALUE DIAL to display "FACT RESET". Press ENTER three times.
ROLAND VG8 Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4ATCHES)(F2YSTEM).
ROLAND VG88 Power on whilst holding down the PAGE < and PAGE >. Then press WRITE twice.
ROLAND VG8EX Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4ATCHES)(F2YSTEM).
ROLAND VGA7 Power on whilst holding down the WRITE button, FLD ALL will flash in the LED. Press WRITE again to complete the proceedure.
ROLAND VK1000 Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT Scren, then press ENTER.
ROLAND VK7 Power on whilst holding down MAIN, SUB and PEDAL in the HARMONIC BAR PART.
ROLAND VK8 Power on whilst holding down UPPER. LOWER and PEDAL in the HARMONIC BAR PART until all the panel indicators light.
ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON.
ROLAND VP70 Power on whilst holding down PLAY, VOICE EXPANSION and MIDI.
ROLAND VP9000 Press UTILITY then PART (>) to go to MENU 2. Press F1 (FACTORY) and then F6 (EXEC).
ROLAND VS1680 No ROM Reset
ROLAND VS1680EX No ROM Reset
ROLAND VS1824 No ROM Reset
ROLAND VS1824CD No ROM Reset
ROLAND VS1880 No ROM Reset
ROLAND VS2480 No ROM Reset
ROLAND VS2480CD No ROM Reset
ROLAND VS840 No ROM Reset
ROLAND VS840EX No ROM Reset
ROLAND VS840GX No ROM Reset
ROLAND VS880 No ROM Reset
ROLAND VS880EX No ROM Reset
ROLAND VS890 No ROM Reset
ROLAND VT1 Power on whilst holding down the PRESET/USER button.
ROLAND W30 No ROM Reset
ROLAND W50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and DOWN to select ALL
milanceshow je offline   Reply With Quote
Star 03.02.2009, 22:39   #6
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND XP10 Press UTILITY. Use the VALUE + or - to select INITIALIZE, then press ENTER. Use the VALUE + or - to select FACTORY PRESET, then press ENTER.
ROLAND XP30 Press UTILITY/CARD. Press the CURSOR DOWN then press #4 (BASS). Press ENTER (if protect message appears, use the DIAL to turn the Memory Protect OFF, then press ENTER twice).
ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ).
ROLAND XP50 Press DISK/UTILITY. Select SOUND, then select PRESET and press ENTER. Use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER twice.
ROLAND XP60 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XP80 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XV2020 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND XV3080 Press UTILITY and the CURSOR DOWN to UTIL page 2. CUROSR (<) or (>) to make the FACTORY RESET flash. Press ENTER three times.
ROLAND XV5050 Press UTILITY and then CUROR (<). Turn the VALUE DIAL to select FACTORY RESET and press ENTER twice.
ROLAND XV5080 Press SYSTEM/UTILITY so that the light starts blinking. Press F6 (MENU) and then F5 (FACTORY). Then press F6 (EXECUTE).
ROLAND XV88 Press UTILITY and then CURSOR DOWN to UTILITY page 2. Press 4(BASS) and then ENTER twice.
milanceshow je offline   Reply With Quote
Sledeći član vam se zahvalio milanceshow za ovaj koristan post:
makikorg (29.08.2009)
Star 03.02.2009, 22:39   #7
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

YAMAHA 02R HOLD "CURSOR LEFT" AND POWER ON.
YAMAHA 02R Press CURSOR[<] + Power on
YAMAHA CLP100 Press key[F0] + Power on
YAMAHA CLP-100 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP121 Press key[F0] + Power on
YAMAHA CLP-121 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP121S Press key[F0] + Power on
YAMAHA CLP-121S HOLD KEY "F0" AND POWER ON.
YAMAHA CLP122 Press key[F0] or key[B1] + Power on
YAMAHA CLP-122 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP122S Press key[F0] or key[B1] + Power on
YAMAHA CLP-122S HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP123 Press key[F0] or key[B1] + Power on
YAMAHA CLP-123 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP124 Press key[F0] or key[B1] + Power on
YAMAHA CLP-124 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP133 Press key[F0] or key[B1] + Power on
YAMAHA CLP-133 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP134 Press key[F0] or key[B1] + Power on
YAMAHA CLP-134 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP152 Press key[F0] + Power on
YAMAHA CLP-152 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP152S Press key[F0] + Power on
YAMAHA CLP-152S HOLD KEY "F0" AND POWER ON.
YAMAHA CLP153 Press key[F0] or key[B1] + Power on
YAMAHA CLP-153 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP153S Press key[F0] or key[B1] + Power on
YAMAHA CLP-153S HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP153SG Press key[F0] or key[B1] + Power on
YAMAHA CLP-153SG HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP154 Press key[F0] or key[B1] + Power on
YAMAHA CLP-154 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP154F Press key[F0] or key[B1] + Power on
YAMAHA CLP-154F HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP154S Press key[F0] or key[B1] + Power on
YAMAHA CLP-154S HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP155 Press key[F0] or key[B1] + Power on
YAMAHA CLP-155 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP156 Press key[F0] or key[B1] + Power on
YAMAHA CLP-156 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP157 Press key[F0] or key[B1] + Power on
YAMAHA CLP-157 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP158 Press key[F0] or key[B1] + Power on
YAMAHA CLP-158 HOLD KEY "F0" OR KEY "B1" AND POWER ON.
YAMAHA CLP20 Press key[F0] + Power on
YAMAHA CLP-20 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP250 Press key[F0] + Power on
YAMAHA CLP-250 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP260 Press key[F0] + Power on
YAMAHA CLP-260 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP30 Press key[B1] + Power on
YAMAHA CLP-30 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP311 Press key[B1] + Power on
YAMAHA CLP-311 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP350 Press key[B1] + Power on
YAMAHA CLP-350 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP360 Press key[F0] + Power on
YAMAHA CLP-360 HOLD KEY "F0" AND POWER ON.
YAMAHA CLP411 Press key[B1] + Power on
YAMAHA CLP-411 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP500 Press key[B1] + Power on
YAMAHA CLP-500 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP511 Press key[B1] + Power on
YAMAHA CLP-511 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP550 Press key[B1] + Power on
YAMAHA CLP-550 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP555 Press key[B1] + Power on
YAMAHA CLP-555 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP560 Press key[B1] + Power on
YAMAHA CLP-560 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP570 Press key[B1] + Power on
YAMAHA CLP-570 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP611 Press key[B1] + Power on
YAMAHA CLP-611 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP705 Press key[B1] + Power on
YAMAHA CLP-705 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP711 Press key[B1] + Power on
YAMAHA CLP-711 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP760 Press key[B1] + Power on
YAMAHA CLP-760 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP811 Press key[B1] + Power on
YAMAHA CLP-811 HOLD KEY "B1" AND POWER ON.
YAMAHA CLP911 Press key[B1] + Power on
YAMAHA CLP-911 HOLD KEY "B1" AND POWER ON.
YAMAHA CLW12 Press key[B1] + Power on
YAMAHA CLW-12 HOLD KEY "B1" AND POWER ON.
YAMAHA CLW14 Press key[B1] + Power on
YAMAHA CLW-14 HOLD KEY "B1" AND POWER ON.
milanceshow je offline   Reply With Quote
Odgovor

Favoriti

Oznake
casio, korg, reset, roland, yamaha

Alati tema
Display Modes

Vaše dozvole
Ne možete postavljati Nove Teme
Ne možete poslati Odgovora
Ne možete postavili Privitke
Ne možete uređivati vaših Postova

BB-Kod je Uključeno.
Smajlići su Uključeno.
[IMG] Code jeUključeno.
HTML-Kod je Uključeno.

Brzi pregled


Trenutno vrijeme na Forumu 08:42


Forum Yu-Midi.org pokreće vBulletin 3.8.1 (Deutsch)
Copyright ©2005 - 2025, Jelsoft Enterprises Ltd. .
Dizajn i izrada sajta www.neospindle.com
Prava zaštićena od strane www.yu-midi.org
ForumForum Privatne porukePrivatne poruke UP/Down CentarUpload/Download Centar TekstoviTekstovi VestiVesti TutorialTutorial AdresarAdresar KalendarKalendar Lista članovaLista članova FacebookFacebook DonacijeDonacije