Kurzweil PC3K6 - RAZNI TUTORIALI

[Miljan]

Hvala puno kolega. Kurzweil - It 's the sound

[baltik79]

Samo da napomenem da je izasao novi Update za Kurzweil sintove,nisam jos probao:
http://kurzweil.com/news/50/
Dodato:
Evo sta je novo u abdejtu


OS Version 2.21 Release Notes

CAUTIONS: Content created with v2 is not backwards compatible to older v1 software versions (exception = .MID files). Content created with a PC3K older than v2 is of course forward compatible with v2.
SETUP MODE:

Fixes/Improvements:

• Exp1/2 buttons now working fine in all circumstances with or without KORE 64 installed and with old or new Master Table being loaded.
• Zone Entry Program/Bank values now respected when duplicating/importing zones; previously they were being reset to the local program/bank numbers.
• Controller entry/exit values corrected for several setups.
• InputChannel CC remapping for cc7/10 and for zones of same channel now handled properly.
• KORE 64 Setups with key-triggered RIFFs reprogrammed to transpose over the octave: 3209 Funkro
  3211 70s Trucker
  3221 Tight R&B Jam
  3225 Afterglow
  3226 Jive-Thirty
  3227 LuvQwest
  3229 Venus
  3233 Thessia
  3234 Electra
  3235 G Rocker
  3236 Buena Vista
  3237 Con Salsa
  3238 P-Horns
  3246 BareKnucklGroove

PROGRAM MODE:

Fixes/Improvements:

• Exp1/2 buttons now working fine in all circumstances with or without KORE 64 installed and with old or new Master Table being loaded.
• All Programs are now categorized (for SoundTower Editor users).
• Tuning issues fixed in #3219 Chirp Attacks.
• EditProg / EditChain - Info editor: Deleting Info item was causing memory corruption.

SAMPLE MODE:

Fixes/Improvements:

• EditSample:TRIM - Better screen draw with zoom = 1. No more constellation of points.
• EditSample:TRIM - New zoom level 1/0.125 for better display of individual samples.
• EditSample:TRIM - Smoother scrolling.
• EditSample:TRIM - When changing roots, proper cursor selection is now made.
• EditSample:TRIM - Zero crossing -/+ buttons are now working more precisely. Previously, selections could be off by several samples.

QA MODE:

Fixes/Improvements:

• Base 1 button no longer acts as mute zone on non-KB3 programs.

STORAGE MODE:

Fixes/Improvements:

• Sample load space detection was reporting less free memory than was actually available therefore some samples couldn't be loaded even if there was sufficient space (bug introduced in 2.20).

MIDI MODE:

Fixes/Improvements:

• CHANLS - Program selections up through GM bank now permitted.

MASTER MODE:

Features:

• UTILS/STATE- This utility shows the internal state of the MIDI CCs and pitch bend in any channel at a particular time. Typical use: "My channel X does not make any sound". Is it MIDI 7 (Volume), is it MIDI 11 (Expression) or is it something else?. With MASTER/UTILS/STATE you can check the status for various CCs per channel.

Fixes/Improvements:

• MEMORY/Defrag - this utility is working properly again. Still, pretty slow if you have a ton of samples. Depending on the number of samples and the size of them it could be faster to store everything on a file, hard reset the PC3K and then load the file again.
• PREVIEW - Now displays 5 samples in the list for better context and also distinguishes user samples with an asterisk *.

GENERAL:

Fixes/Improvements:

• In the Save dialog for a Setup, KORE 64 or GM Program, the (+/-) double-button press for toggling the 'save-to' destination is now working properly.
• KORE 64 objects now editable via Sound Tower editor.
• Small (rare) bug fixes related to AUXFX.

[baltik79]

KAKO SE VRSI UPDATE (Instalacija OS)

1.Pritisni i zadrzi taster EXIT

2.Ukljuci klavijaturu

3.Kada se pojavi na displeju sljedece pusti taster EXIT

Run System Run System System PC3K Update Diags Reset Utilities

4.Ukljuci USB u klavijatruru

5.Klikni na System Utilities:

Run System Run System System
PC3K Update Diags Reset Utilities

6.Klikni na Format Flash:
Format Install Restore
Flash Module Older Back

7.Zatim te pita jesi li siguran; klikni na YES

8.Sacekas dok zavrsi i kliknes na OK
9.Klikni na System Update:
Run System Run System System
PC3K Update Diags Reset Utilities

10.Sada ce izaci poruka preko cega hocete da instalirate Update (racunar ili
USB.Posto je jednostavnije preko USB-a objasnicu taj nacin.Klikni na USB
Device:

USB PC
Device USB Back

11.Zatim ce ti klavijatura otvoriti tvoj USB i ti izaberi fajl za Update (sa
ekstenzijom KUF)i klikni OK

12.Sada pocinje abdejtovanje.Sacekaj dok se zavrsi i prikaze poruka da je
instalirano i tada klikni na OK:
File PC3K2xx.KUF was installed.
OK

13.Sada samo iskljucite i ukljucite klavijaturu i abdejt je zavrsen

[Miljan]

Evo da dam jedan savjet korisnicima Kurzweila pc3k6, da se ne bi ponavljao problem koji sam ja imao, a tice se efekata: ne postavljaj te jedan isti efekat koji ste napravili, na neke boje na aux a na neke na insert. Poz svima.

[baltik79]

Sta se desava u tom slucaju brate?

[Miljan]

Ako postavimo isti efekat koji smo napravili na neku boju na aux a na neku na insert efekat ne radi normalno na jednom od modova (aux ili insert), efekat postane jaci, izlazi u prvi plan, a sama boja u drugi plan. Ne znam kako tacno da docaram, ali kao da svirate efektom, a sama boja postaje efekat, ne znam da li sam dobro priblizio.
Ja sam napravio boje sa insert efektom, imao sam nekih terci u setup-u. Medjutim sam primjetio da se vec na osmoj ili devetoj zoni (kada pravite tercu ili slicno) efekat gubi. Pa sam dosao na ideju da napravim istu boju u program, npr trubu sa insert efektom i trubu sa aux efektom (u cilju da bih mogao da napravim tercu ali tako da svaka zona ima efekat u setup modu) pri cemu sam na insert i na aux postavio isti efekat koji sam napravio. E nakon toga je nastala opsta pometnja, tj desilo se ono sto sam gore naveo, kod boja u setupu u prvi plan je dosao efekat sto je zvucalo totalno neprirodno, i to se desilo na onim bojama na kojima sam postavio insert efekat... Nakon pet dana sam otkrio u cemu je problem i napravio sam posebno efekat koji koristim na aux a posebno efekat koji koristim na insert.
Mozda sam negdje ja pogresno nesto uradio.. Ako neko to smatra ili zna gdje sam pogrijesio nek mi sugerise. Poz svima.

[beronjan]

Mala dopuna za onaj SEARCH tutorial:
Kad ukucate karakter koji trazite, npr PIANO, sint vam izbaci prvi program koji sadrzi tu rec u nazivu. Ako to nije taj PIANO koji ste trazili, drzite ENTER i stisnete + (plus), i sint pronalazi sledeci program koji sadrzi trazenu rec. A ako vam treba prethodni program sa trazenim karakterom, ENTER i - (minus).
Dodato:
1. Povežite sustain pedalu u Switch Pedal 1
2. Izaberite KB3 program koji želite da editujete i pritisnite EDIT
3. Idite na [MISC] stranu
4. Podesite SUSTAIN: On
5. Podesite LESLIE PEDAL: None



6. Sačuvajte program i to je to

Ovo se mora raditi za svaki program posebno.

Postoji i opcija da sustain pedala ima obe funkcije. U tom slučaju podesite LESLIE PEDAL: Sustain. Sad sustain pedala radi kao običan sustain, a istovremeni i kao Leslie On/Off prekidač.