Kurzweil PC3K6 - RAZNI TUTORIALI

[baltik79]

Samo da napomenem da je izasao novi Update za Kurzweil sintove,nisam jos probao:
http://kurzweil.com/news/50/
Dodato:
Evo sta je novo u abdejtu


OS Version 2.21 Release Notes

CAUTIONS: Content created with v2 is not backwards compatible to older v1 software versions (exception = .MID files). Content created with a PC3K older than v2 is of course forward compatible with v2.
SETUP MODE:

Fixes/Improvements:

• Exp1/2 buttons now working fine in all circumstances with or without KORE 64 installed and with old or new Master Table being loaded.
• Zone Entry Program/Bank values now respected when duplicating/importing zones; previously they were being reset to the local program/bank numbers.
• Controller entry/exit values corrected for several setups.
• InputChannel CC remapping for cc7/10 and for zones of same channel now handled properly.
• KORE 64 Setups with key-triggered RIFFs reprogrammed to transpose over the octave: 3209 Funkro
  3211 70s Trucker
  3221 Tight R&B Jam
  3225 Afterglow
  3226 Jive-Thirty
  3227 LuvQwest
  3229 Venus
  3233 Thessia
  3234 Electra
  3235 G Rocker
  3236 Buena Vista
  3237 Con Salsa
  3238 P-Horns
  3246 BareKnucklGroove

PROGRAM MODE:

Fixes/Improvements:

• Exp1/2 buttons now working fine in all circumstances with or without KORE 64 installed and with old or new Master Table being loaded.
• All Programs are now categorized (for SoundTower Editor users).
• Tuning issues fixed in #3219 Chirp Attacks.
• EditProg / EditChain - Info editor: Deleting Info item was causing memory corruption.

SAMPLE MODE:

Fixes/Improvements:

• EditSample:TRIM - Better screen draw with zoom = 1. No more constellation of points.
• EditSample:TRIM - New zoom level 1/0.125 for better display of individual samples.
• EditSample:TRIM - Smoother scrolling.
• EditSample:TRIM - When changing roots, proper cursor selection is now made.
• EditSample:TRIM - Zero crossing -/+ buttons are now working more precisely. Previously, selections could be off by several samples.

QA MODE:

Fixes/Improvements:

• Base 1 button no longer acts as mute zone on non-KB3 programs.

STORAGE MODE:

Fixes/Improvements:

• Sample load space detection was reporting less free memory than was actually available therefore some samples couldn't be loaded even if there was sufficient space (bug introduced in 2.20).

MIDI MODE:

Fixes/Improvements:

• CHANLS - Program selections up through GM bank now permitted.

MASTER MODE:

Features:

• UTILS/STATE- This utility shows the internal state of the MIDI CCs and pitch bend in any channel at a particular time. Typical use: "My channel X does not make any sound". Is it MIDI 7 (Volume), is it MIDI 11 (Expression) or is it something else?. With MASTER/UTILS/STATE you can check the status for various CCs per channel.

Fixes/Improvements:

• MEMORY/Defrag - this utility is working properly again. Still, pretty slow if you have a ton of samples. Depending on the number of samples and the size of them it could be faster to store everything on a file, hard reset the PC3K and then load the file again.
• PREVIEW - Now displays 5 samples in the list for better context and also distinguishes user samples with an asterisk *.

GENERAL:

Fixes/Improvements:

• In the Save dialog for a Setup, KORE 64 or GM Program, the (+/-) double-button press for toggling the 'save-to' destination is now working properly.
• KORE 64 objects now editable via Sound Tower editor.
• Small (rare) bug fixes related to AUXFX.

[dmmacak]

Ne znam da li sam dobro razumeo, znaci kada promenis setap ostaje ti volume tih baseva kako si namestio na slajderima nevezano za setap.
Pitam zato npr kada bih postavio neki drum kit na jednu zonu i slao midi podatke sa aranzera, kada promenim setap da mi bubanj ostane ne promenjen, jednom recju da radi kao poseban part. Ako je to moguce.

[beronjan]

@radisadv1205
Svaka čast kolega! Kurzweil me oduševi svaki put

[radisadv1205]

@dmmacak tako je ostaje volume kako je podesen na slajderu, ali trebalo bi odraditi ista podesavanja za svaki setup koji ces da koristis. E sad, za midi nisam siguran, treba probati.

[dmmacak]

Imam jos jedno pitanje... Ako koristis isti bas i ista podesavanja u vise setapa da li prilikom menjanja istih se oseti "seckanje".

[radisadv1205]

Oseca se seckanje ali meni to ne smeta puno, ali posto si ti mislio da radis sa bubnjem na taj nacin to bi verovatno bio problem. Zasto ne probas bubanj da vuces preko midia iz programa nezavisno od setapa tako sto mu dodelis odredjeni kanal ili kako vec to ide, podesis tako u obe klavijature i pri promeni setapa ostaje ti uvek isti bubanj. Nisam to jos uvek probao. Skoro da sam siguran da moze nesto ovako da se izvede.

[beronjan]

Da li ste probali da namestite AllKeysUp za promenu setapa, jel i onda ima puckanja?

[radisadv1205]

Ne, gde se nalazi ta opcija?

[beronjan]

MIDI mode, XMIT stranica, i tu imaš SETUP CHANGE. Postoje dve varijante: IMMEDIATE (to je da se momentalno promeni setap); i AllKeysUp (setap se ne menja dok ne pustiš dirke). Probaj sa tim pa vidi da li i onda ima pucketanja.

[dmmacak]

Nazalost jos ne posedujem klavijaturu pa ne mogu nista da isprobam. Meni je to vrh klavijatura, od kada sam je video i probao zaljubio sam se:-):-). Nisam je kupio iz razloga sto svi kazu da je jako komplikovana za sredjivanje, a malo ih ima da bih mogao da licno isprobam to sredjivanje. I kako u zadnje vreme sve vise radim aranzersku svirku, mislio sam da pare namenjene za bolji aranzer ulozim u Kurzweila, pa da sve to upakujem da radi extra.