Problem sa preformansom g1000

[igorr]

Ej ljudi imam problem sa performansom kad stsnem npr. A broj 1 on otvori on to i otvori,na A grupi radi dobro ali problem je kad pritisnem B grupu on na displeju mi otvara A,B gupa radi dobro samo ne vidim gdje mi je sta memorisno tako i C stalno otvara A,satra se sve moram pamtiti,zna li neko o cemu je rjec,mozda da je resetujem, ali kako?

[daliborkorg]

snimi set i izvadi bateriju da odstoji tako 10-ak minuta. Meni su se slice greske javljale na g600-800 i tako sam resavao problem, probaj nista te ne kosta.

[milanceshow]

Mozda ti ovo pomogne malo!!!

Q: Initializing the G-1000 - Restoring the Factory Settings
A: The following procedure can be used to clear the internal memory and reload the factory settings:

(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)

The G-1000 does not have a "hard reset" function to load the factory settings.
Performance Sets, MIDI Sets and Custom Sets need to be loaded from the G-1000 factory ZIP disk to restore factory default settings. Use the following procedure to restore the original factory data from the factory ZIP Disk:

Use the following procedure to prepare the G-1000 for loading the factory ZIP disk files:

1) Turn the unit off.
2) Insert the factory ZIP Disk into the drive.
3) Turn the unit on.

Now select the desired factory sets:

To Load Performance Sets:
1) Press F5 [Disk.]
2) Press F1 [Load.]
3) Press PAGE ^ / v to select "PRF MEM."
4) Press UPPER 1[Execute] to load the Performance Memory data.
5) Press F5 [Exit] to return to the Master page.

To Load MIDI sets:
1) Press F5 [Disk.]
2) Press F1 [Load.]
3) Press PAGE ^ / v to select "MIDI Set."
4) Press UPPER 1[Execute] to load the MIDI Set data.
5) Press F5 [Exit] to return to the Master page.

To Load Custom Sets to the Custom memories:
1) Press F5 [Disk.]
2) Press SHIFT and F3 [Utility.]
3) Press F1[CstLd.]
4) Turn the ACCOMP/GROUP knob to select Custom Set "US-STL01."
5) Press UPPER 1 [LOAD] to load this Custom Set.
6) Press LOWER 1 to confirm the loading procedure.
7) Press F5 [Exit] to return to the Master page.

[RadeKOKI]

potrazi OS za G1000 i probaj da zamenis mozda ti je stari os malo pobrljavio, hoce to kod rolanda da se desava. Pozdrav

[igorr]

Ma sve ja imam sacuvano midi set i performans i style set ali opet mi nije jasno kako da ga restartujem gore pise kao da ne moze da se uradi taj HARD RESET,jbga.....I sta je to OS.ne kontam.pozzz

[milanceshow]

OS je skracenica za Operativni Sistem!

Kada imas problema sa kompom,pa ti uspori rad,restartuje se,ukoci i tako to.Pa ako nikako nemozes to da sredis,a ti uzmes pa ga preinstaliras.I komp opet radi normalno!!!!

Isti je slucaj i sa klavijaturom!I one imaju OS (Operativni sistem).Pa kad ne uspes da resis problem ,ti resetujes klavijaturu ili joj ubacis novi OS!!!!!!

Samo trebas da je resetujes!I mislim da ce to da resi problem!
Nemogu da se setim tacnog postupka!!!!!

[bravo9]

Roland G 1000 nema factory reset ali zato mozes ponovo ucitati OS. Ja sam najcesce koristio 1.5 i nisam imao puno problema . Ima i 1.6 i 1.7 ali imaju dosta bugova.Potrazicu gde imam taj Os pacu postaviti u download .

[igorr]

E to bi bila prava stvar,valjda ce neko znati pa da sredim i to.U svakom slucaju Milance hvala puno.pozzz

[bravo9]

Evo kako da proveris tvoj OS:
You can check the version of your G-1000 SW, by holding down the "SHIFT", "WRITE" and "RESET" buttons down simultanously and power-on the keyboard. The version number of the sw will then be shown on the display. U download sekciji imas i OS 1.06

[igorr]

Svaka TI CAST bravo,hvala