Videti jedan post
Star 03.08.2011, 23:35   #2
Ace
White Noise
 
Ace's Avatar
 
Registrovan/a dana: 20.08.2009
Mjesto: Skopje, Makedonija
Godina: 33
Postovi: 1.693
Downloads: 1229
Uploads: 32
Rekao HVALA: 15
Zahvalili mu 367 puta u 330 Postova
Instrumenti: Korg
Interesi: Muzika, Informatika, Matematika, Fizika, Elektronika...
Ace ist zur Zeit noch ein unbeschriebenes Blatt
Standard

Pise ti tamo sta je sve novo .....
Evo i ovde nek ima

(Expression) When selecting Performances created on a Korg Pa2X/
Pa800, Expression values were reset to 127.

(Start-up) When turning the instrument on, a wrong Style track’s volume
level was selected, due to the incorrect reading of the Expression values.

(Start-up) Wrong Pad parameters were shown, when turning the
instrument on with the Pad Lock activated.

(Style Select) When the Style Select window was open, and the Tempo
dialog box was recalled by using the +/- or SHIFT-DIAL commands, if you
touched the Tempo dialog box it was no longer possible to exit from it
(unless you selected a different tab in the Style Select window).

(Write STS) The Write STS command was not properly executed when
the STS MODE button was turned off.

(Split) The Split could be deactivated after saving a Style, if the Keyboard
Mode (Split) / Chord Scanning Lock was turned on.

(Key and Chord) When first accessing Pad Record mode to record a new
Pad, it was not possible to change the Key and Chord parameters.

(Guitar Mode) The Strings High and Low parameters were not shown.

(Mic Reverb) When accessing Song Play mode, the Reverb assigned to
the Mic input could be lowered to zero. This was caused by the Harmony
Control parameter, when it was set to receive all notes from one of the
tracks of the Players.

(MP3) MP3 files with a 22 kHz sample rate where not correctly
reproduced.

(New Song) The Song Selection Number was lost, when choosing the
New Song command from the Write Song dialog box.

P.S. Ako neko ne razume, mozemo i da prevedemo
__________________

Evil is just a point of view

Ace je offline   Reply With Quote