Tema: Tr brisanje
Videti jedan post
Star 13.07.2008, 14:07   #7
jager
Odomaćeni član
 
jager's Avatar
 
Registrovan/a dana: 17.06.2007
Mjesto: Subotica, Srbija
Godina: 55
Postovi: 512
Downloads: 69
Uploads: 12
Rekao HVALA: 4
Zahvaljeno 2 puta u 1 Postu
Instrumenti: Korg Triton Extreme
jager befindet sich auf einem aufstrebenden Ast
jager pošalji poruku preko MSN messengera
Standard

udjes u GLOBAL i tamo ces naci sto trazis...

Evo i uputstva kako resetovati na fabricka podesavanja za neke KORG klavijature:

Product
Preload Instructions
01/W Series Global screen 7 Press G then E
03R/W Global screen 5D, then select “OK”.
05R/W Global Screen 5A, then select “OK”.
168RC Factory data must be transmitted and returned via SysEx dump.
A1 Card Load only from a SPC0A1 (Card no longer available)
A2/A3 Hold Up and Down arrows while turning it on.
A4 Hold Bank Up and Write while turning it on. PL appears, press write again.
A5 Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen.
AD120VT Preload - Hold down the value Up/Down button and TUNER/CANCELL. A 'P' will flash in the LED. Press the write button
AX1000G Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs.
AX100G Hold FX Select and EXIT button while turning it on. Press write button.
AX1500G Hold down Bank footswitch EXIT button while turning it on. Then press Write button.
AX1G/B Hold down the left arrow key and the "+ " while powering on. Then press the "+" button again.
AX300G/B Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again.
C-Series Disk Load C900 (CFD01P) Ci86/9600 (CID00PE )
CX-3 Hold Program 2 and 7 while turning it on.
D Series Backup CDs
EX8000 From Tape only (Contact us via the support form for more information)
G3 Hold Bank and Write while turning it on. Release both and then press Write again.
i1/i2/i3 Disk Load (IFD01P for i3 and i2, IFD02P for i1)
I30 Disk Load (I30FD00P)
i5S/M Disk Load (IFD00P)
iS35/40/50/B i40M Disk Load (IFDD1006 except for iS40 and i40M which is IFDD1007)
iX300 Disk Load (IXD00P)
KAOSS Pad N/A
KARMA Disk Load (KMFD00P)
M1 Card Load (MPC00P) or Sysex Dump. Please contact support for information on how to send data via Sysex. (Card no longer available)
M1R/M1REX Card Load (MPC00P, MPC0EX for EX model, no longer available)
M3R Global screen 5D “OK”, then select "OK."
MS2000/2000R Global screen 2D, then select "OK".
N1/N5/EX Press Utility, select "Factory Reset" then press Enter.
N1R Press Global, Page > to Init. Select "Factory Preload" then press Enter.
N364/N264 Disk Load (NSD3)
NX/NS5R Enter button, then select Utility, Preset, Factory Preset, Yes.
PA80/60 Disk Load (6 Disk set available from www.korgpa.com)
Prophecy Global screen 19, press Enter.
PX1 Metronome and Enter buttons while powering on. Then press the "+" button.
PX2 Rhythm and Enter buttons while powering on. Then press the "+" button.
PX3/PX3B PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune.
PX4/PX4B PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec.
S3 Hold Stop and S1 while turning it on.
SG Rack Global screen 7, then select "OK".
SGPROX Program Edit mode screen 14 (Each program!)
SP500 Function screen 7.
T Series Disk Load (TSD00PII)
Trinity Series Disk Load (TFD00P and TFD01P)
Triton Classic/ST Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio)
Triton LE Global mode, F8, Select "Preload" then OK
Triton Rack Disk Load (TNRFD00P and TNRFD01P)
TR Rack Global screen 10, then select "OK".
WS/WSEX/AD Card Load (WPC00PI, II and III)
WSSR Card Load (WPC00PI, II and III)
X2/X3/X3R Disk Load (XSD00P)
X5/X5D/DR Global Screen 5A, then select “OK”.
Z1/Z1EX Preload screen in global mode.
__________________
... bolje 5 do 12 nego nijedna posle 1
jager je offline   Reply With Quote
Ćlan 2 Vam se zahvalio, jager, za koristan post:
dolovo (25.10.2018), koko11 (19.08.2011)